XXL TurboSwing Ski Tow Bar
*Continental US Only
TurboSwing’s patented technology (Patent #7798087) elevates the tow rope above the wake without taking up valuable real estate inside the boat.
Corrosion resistant 316 stainless steel tow bar elevates the tow rope to keep it clear of the wake and prop wash |
Pulley system affords smooth, consistent pulls |
Improves vessel stability, maneuverability, fuel economy and towing power |
Universal motor bracket installation - fits virtually any brand of outboard motor |
Tow ropes clip quickly and easily to TurboSwing pulley system |
Can accommodate multiple riders |
Protects engine from impact |
Tow bar can be quickly removed |
Why TurboSwing is the ultimate towing solution
Pull Multiple Tubes, Wakeboarders, and More
The TurboSwing is made to handle it all - from your favorite board sports to pulling tubes and other inflatables; this tow bar has your summer fun covered.
Premium Stainless Steel Construction
We don't skimp when it comes to quality, that is why all TurboSwings are constructed of 316 stainless steel to handle the toughest of marine environments.
Patented Mounting System Provides Easy DIY Installation
What makes each TurboSwing truly unique lies in its patented design - the TurboSwing mounts directly to your existing outboard motor bracket for an easy install.
How does the TurboSwing work?
By utilizing your existing motor bracket, the TurboSwing not only mounts easily, but it is secured to the strongest point of your boat. Couple this with premium stainless steel construction and a Delrin® self-lubricating pulley and you have the only device rated to safely pull multiple tubes behind your boat.
Premium is an understatement
Safely pulling multiple tubes is no easy feat - that is why we use all 316 stainless steel hardware and have meticulously engineered the TurboSwing mounting bracket for maximum strength and reliability. In fact, we have attempted creating an even better bracket, but have yet to beat the existing TurboSwing design.
Smooth pulls, everytime
Not only does the TurboSwing EZ Pulley™ reduce friction on the rider - it also helps improve boat handling while under tow! By gracefully rolling along the curved tow bar, the TurboSwing pulley allows for smooth lateral transitions - without the line jerking experienced with ski pylons and wakeboard towers.
Pro Tip: Planning on upgrading your outboard motor?
If you are thinking about upgrading to a larger outboard, we recommend getting a size up on your TurboSwing. Each TurboSwing model is designed to fit up to a specific motor size and below – so if you are considering a motor upgrade in the future, you can keep your same TurboSwing by scaling up today! And don’t worry, if you change your mind on the upgrade, your larger TurboSwing will still work just fine on your existing outboard.
Easy DIY Installation
The TurboSwing installs in less than an hour so you can spend more time out on the water. By piggybacking on the existing motor bracket, all that is needed to complete the TurboSwing installation is the addition of 2 stabilizing bolts and to insert the tow bar - it's that easy!
Shipping Information
Most packages ship via FedEx. When you place your order, you will have a choice of delivery timeframes (Ground, Second day, etc.). You will also receive an order confirmation which will allow you to track your shipment's progress. Keep in mind that while most items ship same day, some products require longer time to ship. International customers are responsible for all duties, taxes, brokerage fees, and any other related import fees.
Returns Policy
If for any reason you are not completely satisfied with your purchase, give us a call within 30 days and we can issue you an RMA. Because we are constantly striving to improve our products to meet the needs of our customers, we ask that you provide us with feedback regarding your return. For additional information, please refer to our Return Policy.
Warranty
Most products come with a 5-YEAR warranty. For any products that arrive scratched, bent, or dented we'll replace upon thorough inspection. Please refer to the Warranty Policy for more information.
Got a Question?
We have had success in using a TurboSwing with things like swim platforms, swim ladders, kicker motors, and even power poles. If you would like more information for your specific set up please give us a call, 855-228-8726.
We have had success in using our TurboSwing with a kicker motor before. Depending on your specific set up you may have to remove the bar when you are wanting to use the kicker motor. What we have found is most people are typically fishing with friends using the kicker motor or out another day towing family so it seems to work out well. If this is not the case the bar is very easily removed by unclipping the provided carabiner clip and pulling the bar straight out of the tube holders while the hardware stays mounted. We would recommend the XXL for the 150 Mercury.
No you are correct the transom bolts will be the same size, going with a larger bar will give you added height.
Yes!
We have had success when installing a TurboSwing with jack plates before. When installing with a jack plate it actually makes it easier to install. You won't have to drill through your transom but drill through the jack plate instead, or your jack plate may already have accommodating holes.
For a 90 HP Yamaha you would need the XXL, We have had success in the past when installing the TurboSwing to an extended engine platform as you would mount it to the extended platform. We have had success with installing TurboSwing with swim ladders, you can give us a call or send us an email for more information on the dimensions to confirm this would work on your specific set up.
Yes! We have had success when installing a TurboSwing with jack platesbefore. When installing with a jack plate it actually makes it easier to install. You won't have to drill through your transom but drill through the jack plate instead, or your jack plate may already have accommodating holes. You can also call or email for more dimensions as well to give you a better idea if it would work for your specific set up.
No, our page will always be the most accurate, you will need the XXL, https://turboswing.com/xxl-turboswing-tow-bar.html.
For any Johnson motor you may use the Evinrude selection in the make of the motor.
We have had success when installing a TurboSwing with power poles and jack plates before, (even ladders and swim platforms). When installing with a jack plate it actually makes it easier to install. You won't have to drill through your transom but drill through the jack plate instead, or your jack plate may already have accommodating holes.
Our XXL turbo swing ski tow bar would work great for you.
Yes, we would recommend the XXL tubro swing ski tow bar!
You may be able to do a flush transom mount to mount the brackets higher.
Yes, you will need the XXL, https://turboswing.com/xxl-turboswing-tow-bar.html.
That was our ski tow rescue bar that you saw, we no longer produce it.
4.9
85% of customers recommend this product
Share your thoughts with other customers
Top customer reviews
- Great first tune pull 0 people found this helpfulI used my new XXL Turbo Swing to pull the grandkids behind my Bennington Pontoon with Yamaha 115 HP outboard and it worked great. Pulley slid back and forth like it is supposed to. Grandkids happy = Happy Grandpa
- Turbo swing 0 people found this helpfulWorks like they advertised. Pulled nice and smooth. Great product
- Pontoon Towbar 3 people found this helpfulPurchased for my 22’ pontoon with a Yamaha 115. Works just as advertised to pull a tube. Had my mechanic install for me. Highly recommend!
- Excellent product!! 0 people found this helpfulInstalled my turbo swing by myself while anchored in 3’ deep water. The installation instructions are very good. The actual install was not difficult, even by myself. The turbo swing is awesome and works like advertised. It is extremely strong and I feel completely safe pulling my grandkids on the tube. It’s the best thing out there! Do yourself a big favor and just get one!
- great product 1 people found this helpfulI put this on a 1999 tracker super v guide. I had tried tying ropes off to the corner doublers on the back but it would pull from one side when turning. with the turbo swing, the boat steered better, actually got on plane, and kept most of the rope out of the water. It worked great pulling the knee board.